Angels horn Turntable Trouble shooting: How to Changing the Stylus?

In this video, we'll be showing you how to change the stylus on your Angels Horn turntable. A worn or damaged stylus can greatly affect the sound quality of your music, so it's important to replace it as soon as you notice any issues. Whether you're a seasoned vinyl enthusiast or just starting out, this tutorial will walk you through the steps of changing the stylus on your Angels Horn turntable. So sit back, grab a fresh stylus, and let's get started!

Changing the Stylus is a simple matter, it only takes three steps to complete: Removing Needle:

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle:

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angel and gently lift the front of the needle upward until it snaps into place. If you need to buy Stylus, please contact us.


3 comments


  • Mason Chin

    I’m trying to the stylus back on but it just won’t go back on. I don’t wanna press too hard hard in case I break it. Any tips for this ?


  • Patrick

    I tried to change cartridge to an AT-VM95E and all I get is some light static. I can not get any music. When I switch back to the AT3600L I get perfect sound. I did adjust the tracking force and balanced the tone arm. Is this cartridge compatible with this tone arm?


  • Levi

    It would be super handy if you had a link right here on the instructional video page to where in your store I can buy this stylus. I’ve used the search function at the top of the page and entered the word stylus several times and still I can’t find it. I imagine if I keep looking I’ll find it.


Leave a comment

Please note, comments must be approved before they are published

此網站已受到 hCaptcha 保護,且適用 hCaptcha 隱私政策以及服務條款